Needle Roller Bearings
Advantages:
- Low cross section
- High load carrying capacity
- High stiffness
- The possibility of assembling inner and outer rings separately permits interference fits for shaft and housing and also enables easy maintenance inspections
- Accommodate axial displacement Except for bearings with flanges on both the inner and outer rings, needle roller bearings with machined rings can accommodate axial displacement
- Accommodate static misalignment
- Locating bearing arrangement Combined needle roller bearings accommodate combined radial and axial loads in one or both directions
| Designation | Fw[mm] | D[mm] | C[mm] | dynamic C[kN] | static C0[kN] | Reference speed[r/min] | Limiting speed[r/min] | Structure |
| NK 5/10 TN | 5 | 10 | 10 | 2.29 | 2 | 36 000 | 40 000 | with machined ring |
| NK 5/12 TN | 5 | 10 | 12 | 2.92 | 2.7 | 36 000 | 40 000 | with machined ring |
| RNAO 5X10X8 TN | 5 | 10 | 8 | 2.29 | 2 | 36 000 | 40 000 | with machined ring |
| NK 6/10 TN | 6 | 12 | 10 | 2.55 | 2.36 | 34 000 | 38 000 | with machined ring |
| NK 6/12 TN | 6 | 12 | 12 | 3.3 | 3.2 | 34 000 | 38 000 | with machined ring |
| RNAO 6X13X8 TN | 6 | 13 | 8 | 2.55 | 2.36 | 34 000 | 38 000 | with machined ring |
| NK 7/10 TN | 7 | 14 | 10 | 2.81 | 2.75 | 32 000 | 36 000 | with machined ring |
| NK 7/12 TN | 7 | 14 | 12 | 3.58 | 3.75 | 32 000 | 36 000 | with machined ring |
| RNAO 7X14X8 TN | 7 | 14 | 8 | 2.81 | 2.75 | 32 000 | 36 000 | with machined ring |
| NK 8/12 TN | 8 | 15 | 12 | 3.8 | 4.25 | 32 000 | 36 000 | with machined ring |