Why a Timken Bearing Interchange Chart Needs Designation Reading?

hsnbearinggroup
August 19, 2026
No Comments

For many bearing buyers, a Timken bearing interchange chart is the first tool they use when they need to compare models, check a replacement direction, or discuss supply options with a bearing supplier. However, an interchange chart should be used as a technical starting point, not as a final replacement decision.

A bearing code can show useful information about series, bore size, bore type, cage design, clearance, and lubrication features. But the final selection still depends on dimensions, load, speed, temperature, mounting method, application conditions, and inspection requirements. This guide uses spherical roller bearings as the main example because they are widely used in heavy industrial equipment and often require careful technical confirmation.

How to Read Timken Bearing Designations?

Timken spherical roller bearing designations normally include a basic bearing number and additional modification or style codes. The basic number helps buyers identify the bearing series and bore size. The letters and suffixes can describe bore type, cage design, internal clearance, lubrication groove, or special application modifications.

For example, Timken official spherical roller bearing catalog information lists common modification and style codes such as K for tapered bore, EJ for a two-piece steel cage, EM/YM and EMB/YMB for brass cage designs, YMD for a two-piece brass cage, and W33 for three holes and a groove in the outer diameter. These codes are important because two bearings with the same basic number may not have the same structure or mounting requirement.

A model such as 22326KEJW33C3 can be read in a practical way:

223 indicates the spherical roller bearing series.
26 is the bore code and should be checked against the actual inner diameter.
K indicates a tapered bore, which affects mounting and adapter sleeve selection.
EJ refers to a cage/design reference and should not be ignored during interchange review.
W33 indicates outer ring lubrication groove and holes.
C3 indicates internal radial clearance greater than normal clearance.

This kind of designation reading helps buyers ask better questions before ordering. It also helps avoid a common mistake: comparing only the number series while missing the suffix that controls the real application fit.

How Should Buyers Compare Spherical Roller Bearing Codes Across Brands?

Timken, SKF, FAG, and NTN may use the same basic spherical roller bearing series and bore size, but their complete designations can describe different internal designs and features. The 22211 examples below show why buyers should compare the full code before considering a cross-brand replacement.

Brand	Complete model example	What buyers should notice
Timken	22211KEJW33C3	K identifies a tapered bore, EJ identifies the Timken steel-cage design, W33 covers lubrication groove and holes, and C3 specifies increased radial internal clearance.
SKF	22211 EK/C3	The model uses SKF E design, a K tapered bore, and C3 clearance. SKF lists this model with a 1:12 tapered bore and relubrication features, even though its suffix structure differs from the Timken example.
FAG	22211-E1-XL-K-C3	E1 and XL identify Schaeffler design and X-life characteristics, while K specifies a 1:12 tapered bore and C3 specifies radial clearance. The suffix structure does not directly mirror Timken or NTN codes.
NTN	22211EMKW33C3	NTN identifies this version with a machined brass cage, K tapered bore, W33 relubrication feature, and C3 clearance. Its cage configuration therefore differs from the Timken example above.

A matching 22211 basic designation identifies a possible comparison family, not a confirmed interchange. Before approving a replacement, buyers should compare boundary dimensions, bore type and taper, cage design, internal clearance, lubrication features, load ratings, speed limits, mounting dimensions, and application requirements. Always retain the complete manufacturer designation in the inquiry and purchase specification.

The same comparison principle also applies to other common spherical roller bearing families, including the 213, 222, 223, 230, 231, 232, 239, 240, and 241 series.

When Timken Bearings Cross Reference Needs Technical Confirmation?

Timken bearings cross reference research becomes more important when the original bearing has a long delivery time, the equipment is stopped, or the buyer wants to compare international brand options. In these cases, a chart can shorten the first round of communication, but the technical details must still be reviewed.

Spherical roller bearings are often used in mining equipment, crushers, vibrating screens, steel mills, paper machines, gearboxes, cement plants, and other heavy-duty applications. These applications can involve high radial load, shock load, misalignment, contamination, temperature variation, or continuous operation. A small difference in clearance, cage, lubrication, or mounting method can affect service performance.

For repair buyers, the safest approach is to provide the original model number, bearing photos, machine position, and working conditions. For distributors, target market and common customer applications are also useful. For OEM customers, drawings and technical requirements are usually more important than a simple model reference.

HSN Support for Bearing Interchange and Customization Discussions

HSN Bearing Group supports bearing replacement discussions, hard-to-find bearing stock sourcing, and customization communication based on model numbers, drawings, samples, and working conditions. HSN is an independent bearing supplier and technical service provider, not an official Timken distributor or authorized Timken replacement provider.

For buyers comparing Timken, SKF, FAG, NTN, and other international bearing brands, HSN can help review model references and discuss practical supply options after technical confirmation. This is useful when standard stock is difficult to find, when a customer needs a cost-performance option, or when a non-standard structure needs to be discussed.

HSN maintains 2000+ tons of bearing inventory and works with multiple manufacturing resources for different bearing categories. Depending on model, quantity, structure, application, and production schedule, HSN can discuss standard supply, replacement review, or customized bearing production. For some custom projects, the production discussion may include drawings, samples, material requirements, heat treatment, dimensional tolerance, and inspection conditions.

HSN Quality Control During Production and Before Shipment

A Timken interchange bearing reference can help buyers find a possible direction, but quality control helps reduce procurement risk. Before shipment, HSN focuses on key inspection items such as dimensional tolerance, hardness, and internal clearance.

According to customer requirements, additional checks can also be discussed, including rotation accuracy, vibration range, noise range, material verification, ultrasonic flaw detection, appearance inspection, and packaging inspection. These checks should be confirmed before ordering so the inspection scope is clear.

HSN has an in-house quality inspection center with equipment such as spectrometers, hardness testers, metallographic microscopes, vision measuring instruments, ultrasonic flaw detectors, vibration testers, and handheld inspection tools. For brand reference and replacement projects, this process helps confirm whether the selected bearing matches the expected dimensions, structure, and working condition before shipment.

What Buyers Should Send for Timken Interchange Review?

To make a Timken bearing interchange chart discussion more accurate, buyers should provide more than a model number whenever possible.

Original Timken model number and any suffixes
Bearing photos, sample photos, or packaging photos
Drawing or measured dimensions
Bore type: cylindrical bore, K tapered bore, or K30 tapered bore
Internal clearance requirement such as C3 or C4
Cage type or cage material requirement
Lubrication groove or oil hole requirement such as W33
Application and installation position
Working load, speed, temperature, and contamination condition
Quantity, delivery time, and packaging requirement
Required inspection items before shipment

With this information, HSN can help review the model reference, check possible supply options, and discuss whether stock supply, replacement review, or customization is more suitable.

Timken Spherical Roller Bearings Common Model Reference

The following list shows a selection of Timken spherical roller bearing part numbers and their basic dimensions, serving as a starting point for locating or comparing alternatives.

HSN Bearing NO.	TIMKEN Bearing NO.	Bore (mm)	0. D (mm)	Width (mm)	Weight (kg)
22205	22205 EJ	25	52	18	0.20
21305	21305 EJ	25	62	17	0.30
22206	22206 EJ	30	62	20	0.30
22206	22206 EM	30	62	20	0.30
21306	21306 EJ	30	72	19	0.40
22207	22207 EJ	35	72	23	0.40
22207	22207 EM	35	72	23	0.40
21307	21307 EJ	35	80	21	0.50
22208	22208 EJ	40	80	23	0.50
22208	22208 EM	40	80	23	0.50
21308	21308 EJ	40	90	23	0.70
22308	22308 EJ	40	90	33	1.00
22308	22308 EM	40	90	33	1.10
22209	22209 EJ	45	85	23	0.60
22209	22209 EM	45	85	23	0.60
21309	21309 EJ	45	100	25	1.00
22309	22309 EJ	45	100	36	1.30
22309	22309 EM	45	100	36	1.40
22210	22210 EJ	50	90	23	0.60
22210	22210 EM	50	90	23	0.60
21310	21310 EJ	50	110	27	1.20
22310	22310 EJ	50	110	40	1.90
22310	22310 EM	50	110	40	1.90
22211	22211 EJ	55	100	25	0.80
22211	22211 EM	55	100	25	0.90
21311	21311 EJ	55	120	29	1.60
22311	22311 EJ	55	120	43	2.40
22311	22311 EM	55	120	43	2.40
22212	22212 EJ	60	110	28	1.10
22212	22212 EM	60	110	28	1.20
21312	21312 EJ	60	130	31	2.00
22312	22312 EJ	60	130	46	3.00
22312	22312 EM	60	130	46	3.00
22213	22213 EJ	65	120	31	1.50
22213	22213 EM	65	120	31	1.60
21313	21313 EJ	65	140	33	2.40
22313	22313 EJ	65	140	48	3.60
22313	22313 EM	65	140	48	3.60
22214	22214 EJ	70	125	31	1.60
22214	22214 EM	70	125	31	1.60
21314	21314 EJ	70	150	35	3.00
22314	22314 EJ	70	150	51	4.40
22314	22314 EM	70	150	51	4.40
22215	22215 EJ	75	130	31	1.70
21315	21315 EJ	75	160	37	3.50
22315	22315 EJ	75	160	55	5.20
22315	22315 EM	75	160	55	5.40
22216	22216 EJ	80	140	33	2.00
22216	22216 EM	80	140	33	2.10
21316	21316 EJ	80	170	39	4.20
22316	22316 EJ	80	170	58	6.40
22316	22316 EM	80	170	58	6.40
22217	22217 EJ	85	150	36	2.60
22217	22217 EM	85	150	36	2.70
21317	21317 EJ	85	180	41	4.90
22317	22317 EJ	85	180	60	7.50
22317	22317 EM	85	180	60	7.50
22218	22218 EJ	90	160	40	3.50
22218	22218 EM	90	160	40	3.50
23218	23218 EJ	90	160	52.4	4.50
23218	23218 EM	90	160	52.4	4.50
21318	21318 EJ	90	190	43	5.80
22318	22318 EJ	90	190	64	8.30
22318	22318 EM	90	190	64	8.80
23318	23318 EM	90	190	73	9.80
21319	21319 EJ	95	200	45	6.50
22219	22219 EJ	95	170	43	4.20
22219	22219 EM	95	170	43	4.20
22319	22319 EJ	95	200	67	10.20
22319	22319 EM	95	200	67	10.20
24020	24020 EJ	100	150	50	3.00
21320	21320 EJ	100	215	47	8.10
23120	23120 EJ	100	165	52	4.40
23120	23120 EM	100	165	52	4.40
22220	22220 EJ	100	180	46	5.00
22220	22220 EM	100	180	46	5.00
23220	23220 EJ	100	180	60.3	6.60
23220	23220 EM	100	180	60.3	6.60
22320	22320 EJ	100	215	73	12.70
22320	22320 EM	100	215	73	12.80
23022	23022 EJ	110	170	45	3.60
24022	24022 EJ	110	170	60	4.90
23122	23122 EJ	110	180	56	5.60
23122	23122 EM	110	180	56	5.60
24122	24122 EJ	110	180	69	6.70
22222	22222 EJ	110	200	53	7.20
22222	22222 EM	110	200	53	7.20
23222	23222 EJ	110	200	69.8	9.60
23222	23222 EM	110	200	69.8	9.60
22322	22322 EJ	110	240	80	17.80
22322	22322 EM	110	240	80	17.80
23322	23322 EM	110	240	92.1	20.40
23024	23024 EJ	120	180	46	4.00
24024	24024 EJ	120	180	60	5.20
23124	23124 EJ	120	200	62	7.90
23124	23124 EM	120	200	62	7.90
24124	24124 EJ	120	200	80	10.00
22224	22224 EJ	120	215	58	9.00
22224	22224 EM	120	215	58	9.00
23224	23224 EJ	120	215	76	11.80
23224	23224 EM	120	215	76	11.80
22324	22324 EJ	120	260	86	21.40
22324	22324 EM	120	260	86	22.30
23324	23324 EM	120	260	106	27.80
23926	23926 EM	130	180	37	2.80
23026	23026 EJ	130	200	52	5.90
24026	24026 EJ	130	200	69	7.80
23126	23126 EJ	130	210	64	8.60
23126	23126 EM	130	210	64	8.60
24126	24126 EJ	130	210	80	10.50
22226	22226 EJ	130	230	64	11.30
22226	22226 EM	130	230	64	11.30
23226	23226 EJ	130	230	80	14.00
23226	23226 EM	130	230	80	14.00
22326	22326 EJ	130	280	93	26.70
22326	22326 EM	130	280	93	27.80
23326	23326 EM	130	280	112	33.80
23928	23928 EM	140	190	37	2.90
23028	23028 EJ	140	210	53	6.20
24028	24028 EJ	140	210	69	8.20
23128	23128 EJ	140	225	68	10.40
23128	23128 EM	140	225	68	10.20
24128	24128 EJ	140	225	85	12.70
26228	26228 EM	140	240	80	14.70
22228	22228 EJ	140	250	68	14.20
22228	22228 EM	140	250	68	14.20
23228	23228 EJ	140	250	88	18.00
23228	23228 EM	140	250	88	18.50
22328	22328 EJ	140	300	102	33.60
22328	22328 EM	140	300	102	34.20
23328	23328 EMB	140	300	118	41.70
23030	23030 EJ	150	225	56	7.50
23030	23030 EM	150	225	56	7.70
24030	24030 EJ	150	225	75	10.20
23130	23130 EJ	150	250	80	15.50
23130	23130 EM	150	250	80	15.50
24130	24130 EJ	150	250	100	19.40
22230	22230 EJ	150	270	73	17.50
22230	22230 EM	150	270	73	17.80
23230	23230 EJ	150	270	96	23.00
23230	23230 EM	150	270	96	23.80
22330	22330 EJ	150	320	108	40.60
22330	22330 EMB	150	320	108	43.00
23330	23330 EMB	150	320	128	50.40
23932	23932 EM	160	220	45	4.90
23032	23032 EJ	160	240	60	9.30
23032	23032 EM	160	240	60	9.30
24032	24032 EJ	160	240	80	12.50
23132	23132 EJ	160	270	86	19.70
23132	23132 EM	160	270	86	20.20
24132	24132 EJ	160	270	109	25.10
22232	22232 EJ	160	290	80	21.90
22328	22328 EJ	140	300	102	33.60
22328	22328 EM	140	300	102	34.20
23328	23328 EMB	140	300	118	41.70
23030	23030 EJ	150	225	56	7.50
23030	23030 EM	150	225	56	7.70
24030	24030 EJ	150	225	75	10.20
23130	23130 EJ	150	250	80	15.50
23130	23130 EM	150	250	80	15.50
24130	24130 EJ	150	250	100	19.40
22230	22230 EJ	150	270	73	17.50
22230	22230 EM	150	270	73	17.80
23230	23230 EJ	150	270	96	23.00
23230	23230 EM	150	270	96	23.80
22330	22330 EJ	150	320	108	40.60
22330	22330 EMB	150	320	108	43.00
23330	23330 EMB	150	320	128	50.40
23932	23932 EM	160	220	45	4.90
23032	23032 EJ	160	240	60	9.30
23032	23032 EM	160	240	60	9.30
24032	24032 EJ	160	240	80	12.50
23132	23132 EJ	160	270	86	19.70
23132	23132 EM	160	270	86	20.20
24132	24132 EJ	160	270	109	25.10
22232	22232 EJ	160	290	80	21.90
22232	22232 EM	160	290	80	23.00
23232	23232 EJ	160	290	104	29.30
23232	23232 EM	160	290	104	30.00
22332	22332 EJ	160	340	114	51.00
22332	22332 EMB	160	340	114	51.00
23332	23332 EMB	160	340	136	61.20
23934	23934 EM	170	230	45	5.20
23034	23034 EJ	170	260	67	12.50
23034	23034 EM	170	260	67	12.50
24034	24034 EJ	170	260	90	16.70
23134	23134 EJ	170	280	88	21.10
23134	23134 EM	170	280	88	21.70
24134	24134 EJ	170	280	109	26.40
22234	22234 EJ	170	310	86	27.30
22234	22234 EM	170	310	86	28.50
23234	23234 EJ	170	310	110	35.80
23234	23234 EM	170	310	110	36.60
22334	22334 EJ	170	360	120	59.90
22334	22334 EMB	170	360	120	59.90
23334	23334 EMB	170	360	140	70.30
23936	23936 EJ	180	250	52	7.60
23936	23936 EM	180	250	52	7.60
23036	23036 EJ	180	280	74	16.80
23036	23036 EM	180	280	74	16.80
24036	24036 EJ	180	280	100	22.60
23136	23136 EJ	180	300	96	27.60
23136	23136 EM	180	300	96	27.60
24136	24136 EJ	180	300	118	33.40
22236	22236 EJ	180	320	86	29.10
22236	22236 EM	180	320	86	29.40
23236	23236 EJ	180	320	112	39.00
23236	23236 EMB	180	320	112	38.60
22336	22336 EJ	180	380	126	69.00
22336	22336 EMB	180	380	126	69.00
23938	23938 EM	190	260	52	8.00
23038	23038 EJ	190	290	75	17.80
23038	23038 EM	190	290	75	17.80
24038	24038 EJ	190	290	100	24.00
24038	24038 EM	190	290	100	24.00
23138	23138 EJ	190	320	104	33.90
23138	23138 EM	190	320	104	34.70
24138	24138 EJ	190	320	128	42.00
22238	22238 EJ	190	340	92	35.00
22238	22238 EMB	190	340	92	36.00
23238	23238 EJ	190	340	120	47.00
23238	23238 EMB	190	340	120	47.10
22338	22338 EJ	190	400	132	80.00
22338	22338 EMB	190	400	132	80.90
23940	23940 EM	200	280	60	11.00
23040	23040 EJ	200	310	82	22.10
23040	23040 EM	200	310	82	21.90
24040	24040 EJ	200	310	109	30.00
24040	24040 EM	200	310	109	30.00
23140	23140 EJ	200	340	112	40.80
23140	23140 EMB	200	340	112	40.70
24140	24140 EJ	200	340	140	51.70
24140	24140 EMB	200	340	140	52.10
22240	22240 EJ	200	360	98	41.70
22240	22240 EMB	200	360	98	42.60
23240	23240 EMB	200	360	128	56.50
26340	26340 EMB	200	380	126	66.00
23340	23340 EMB	200	420	165	112.60
22340	22340 EJ	200	420	138	89.00
22340	22340 EMB	200	420	138	93.00
23944	23944 EM	220	300	60	12.00
23044	23044 EJ	220	340	90	28.70
23044	23044 EM	220	340	90	28.80
24044	24044 EJ	220	340	118	39.00
24044	24044 EMB	220	340	118	39.30
23144	23144 EJ	220	370	120	52.80
23144	23144 EMB	220	370	120	52.80
24144	24144 EJ	220	370	150	65.00
24144	24144 EMB	220	370	150	65.00
22244	22244 EJ	220	400	108	59.40
22244	22244 EMB	220	400	108	59.40
23244	23244 EJ	220	400	144	79.00
23244	23244 EMB	220	400	144	79.40
26344	26344 EMB	220	420	138	88.20
22344	22344 EJ	220	460	145	111.00
22344	22344 EMB	220	460	145	118.50
23948	23948 EM	240	320	60	12.90
23048	23048 EJ	240	360	92	33.00
23048	23048 EM	240	360	92	33.00
24048	24048 EJ	240	360	118	42.00
24048	24048 EMB	240	360	118	41.80
23148	23148 EJ	240	400	128	64.90
23148	23148 EMB	240	400	128	65.00
24148	24148 EJ	240	400	160	80.50
24148	24148 EMB	240	400	160	80.50
22248	22248 EJ	240	440	120	77.00
22248	22248 EMB	240	440	120	81.00
23248	23248 EJ	240	440	160	104.80
23248	23248 EMB	240	440	160	108.00
26348	26348 EMB	240	460	147	113.00
22348	22348 EMB	240	500	155	149.20
26250	26250 EM	250	410	128	64.00
23952	23952 EM	260	360	75	22.80
23052	23052 EJ	260	400	104	47.50
23052	23052 EMB	260	400	104	47.60
24052	24052 EJ	260	400	140	63.90
24052	24052 EMB	260	400	140	63.90
23152	23152 EJ	260	440	144	87.70
23152	23152 EMB	260	440	144	90.00
24152	24152 EJ	260	440	180	112.00
24152	24152 EMB	260	440	180	111.40
22252	22252 EMB	260	480	130	105.50
23252	23252 EJ	260	480	174	135.80
23252	23252 EMB	260	480	174	140.00
22352	22352 EMB	260	540	165	184.50
23352	23352 EM	260	540	206	227.00
23956	23956 EMB	280	380	75	24.30
23056	23056 EJ	280	420	106	48.80
23056	23056 EMB	280	420	106	51.00
24056	24056 EJ	280	420	140	68.00
24056	24056 EMB	280	420	140	68.00
23156	23156 EJ	280	460	146	93.30
23156	23156 EMB	280	460	146	96.80
24156	24156 EJ	280	460	180	118.00
24156	24156 EMB	280	460	180	118.00
22256	22256 EMB	280	500	130	112.10
23256	23256 EJ	280	500	176	149.00
23256	23256 EMB	280	500	176	149.60
22356	22356 EMB	280	580	175	226.30
23356	23356 EMB	280	580	224	284.00
23960	23960 EMB	300	420	90	38.40
23060	23060 EJ	300	460	118	68.20
23060	23060 EMB	300	460	118	71.20
24060	24060 EJ	300	460	160	96.00
24060	24060 EMB	300	460	160	97.40
23160	23160 EJ	300	500	160	124.90
23160	23160 EMB	300	500	160	128.70
24160	24160 EJ	300	500	200	158.00
24160	24160 EMB	300	500	200	157.10
22260	22260 EMB	300	540	140	142.00
23260	23260 EJ	300	540	192	191.00
23260	23260 EMB	300	540	192	194.50
23964	23964 EMB	320	440	90	40.60
23064	23064 EJ	320	480	121	74.20
23064	23064 EMB	320	480	121	77.40
24064	24064 EJ	320	480	160	101.00
24064	24064 EMB	320	480	160	102.00
23164	23164 EJ	320	540	176	160.50
23164	23164 EMB	320	540	176	167.10
24164	24164 EJ	320	540	218	203.00
24164	24164 EMB	320	540	218	204.60
22264	22264 EMB	320	580	150	177.10
23264	23264 EJ	320	580	208	240.00
23264	23264 EMB	320	580	208	245.10
23968	23968 EMB	340	460	90	43.00
23068	23068 EJ	340	520	133	101.00
23068	23068 EMB	340	520	133	102.70
24068	24068 EJ	340	520	180	137.00
24068	24068 EMB	340	520	180	139.00
23168	23168 EJ	340	580	190	206.00
23168	23168 EMB	340	580	190	210.30
24168	24168 EMB	340	580	243	266.00
23268	23268 YMB	340	620	224	292.40
23972	23972 EMB	360	480	90	45.00
23072	23072 EJ	360	540	134	107.00
23072	23072 EMB	360	540	134	108.30
24072	24072 EJ	360	540	180	144.00
24072	24072 EMB	360	540	180	145.40
23172	23172 EJ	360	600	192	218.00
23172	23172 EMB	360	600	192	222.10
24172	24172 EMB	360	600	243	279.50
22272	22272 YMB	360	650	170	245.00
23272	23272 YMB	360	650	232	338.60
23976	23976 EMB	380	520	106	67.10
23076	23076 EJ	380	560	135	112.00
23076	23076 EMB	380	560	135	114.20
24076	24076 EMB	380	560	180	151.20
23176	23176 YMB	380	620	194	232.60
24176	24176 YMB	380	620	243	291.00
22276	22276 YMB	380	680	175	274.00
23276	23276 YMB	380	680	240	379.40
23980	23980 EMB	400	540	106	69.20
23080	23080 EJ	400	600	148	146.00
23080	23080 EMB	400	600	148	148.70
24080	24080 EMB	400	600	200	200.00
23180	23180 YMB	400	650	200	261.60
24180	24180 YMB	400	650	250	322.30
22280	22280 YMB	400	720	185	326.00
23280	23280 YMB	400	720	256	457.50
22380	22380 YMB	400	820	243	618.70
23984	23984 EMB	420	560	106	71.90
23084	23084 YMB	420	620	150	156.00
24084	24084 YMB	420	620	200	206.70
23184	23184 YMB	420	700	224	350.80
24184	24184 YMB	420	700	280	432.60
23284	23284 YMB	420	760	272	541.00
23988	23988 EMB	440	600	118	98.00
23088	23088 YMB	440	650	157	180.00
24088	24088 YMB	440	650	212	241.80
23188	23188 YMB	440	720	226	367.80
24188	24188 YMB	440	720	280	449.10
23288	23288 YMB	440	790	280	602.00
23992	23992 YMB	460	620	118	100.90
23092	23092 YMB	460	680	163	205.00
24092	24092 YMB	460	680	218	270.80
23192	23192 YMB	460	760	240	436.90
24192	24192 YMB	460	760	300	544.90
23292	23292 YMB	460	830	296	696.70
23896	23896 EMB	480	600	90	57.00
23996	23996 YMB	480	650	128	123.30
23096	23096 YMB	480	700	165	215.00
24096	24096 YMB	480	700	218	282.10
23196	23196 YMB	480	790	248	490.40
24196	24196 YMB	480	790	308	605.30
23296	23296 YMB	480	870	310	821.20
238/500	238/500 YMB	500	620	90	60.00
239/500	239/500 YMB	500	670	128	125.70
230/500	230/500 YMB	500	720	167	222.00
240/500	240/500 YMB	500	720	218	290.80
231/500	231/500 YMB	500	830	264	584.30
241/500	241/500 YMB	500	830	325	700.00
232/500	232/500 YMB	500	920	336	995.10
239/530	239/530 YMB	530	710	136	150.40
230/530	230/530 YMB	530	780	185	302.60
240/530	240/530 YMB	530	780	250	408.00
231/530	231/530 YMB	530	870	272	650.60
241/530	241/530 YMD	530	870	335	791.00
232/530	232/530 YMB	530	980	355	1164.00
239/560	239/560 YMB	560	750	140	172.40
230/560	230/560 YMB	560	820	195	349.10
240/560	240/560 YMB	560	820	258	463.90
231/560	231/560 YMB	560	920	280	751.00
241/560	241/560 YMB	560	920	355	941.70
241/560	241/560 YMD	560	920	355	941.70
232/560	232/560 YMB	560	1030	365	1333.00
238/600	238/600 YMB	600	730	98	81.00
239/600	239/600 YMB	600	800	150	209.60
230/600	230/600 YMB	600	870	200	395.00
230/600	230/600 YMD	600	870	200	394.00
240/600	240/600 YMB	600	870	272	538.90
240/600	240/600 YMD	600	870	272	538.90
231/600	231/600 YMB	600	980	300	905.00
241/600	241/600 YMB	600	980	375	1088.90
241/600	241/600 YMD	600	980	375	1087.90
232/600	232/600 YMD	600	1090	388	1565.10
239/630	239/630 YMB	630	850	165	267.60
230/630	230/630 YMB	630	920	212	477.20
240/630	240/630 YMB	630	920	290	647.80
240/630	240/630 YMD	630	920	290	647.10
231/630	231/630 YMD	630	1030	315	1056.30
241/630	241/630 YMD	630	1030	400	1294.50
238/670	238/670 YMB	670	820	112	125.50
239/670	239/670 YMB	670	900	170	306.70
230/670	230/670 YMB	670	980	230	596.00
240/670	240/670 YMB	670	980	308	794.50
231/670	231/670 YMB	670	1090	336	1247.00
241/670	241/670 YMD	670	1090	412	1513.40
232/670	232/670 YMD	670	1220	438	2181.40
239/710	239/710 YMB	710	950	180	360.60
230/710	230/710 YMB	710	1030	236	658.80
240/710	240/710 YMD	710	1030	315	865.20
231/710	231/710 YMB	710	1150	345	1382.70
241/710	241/710 YMD	710	1150	438	1754.70
232/710	232/710 YMD	710	1280	450	2478.40
238/750	238/750 YMB	750	920	128	182.70
239/750	239/750 YMB	750	1000	185	405.70
230/750	230/750 YMB	750	1090	250	786.00
240/750	240/750 YMD	750	1090	335	1049.20
241/750	241/750 YMD	750	1220	475	2144.40
239/800	239/800 YMB	800	1060	195	474.20
249/800	249/800 YMB	800	1060	258	612.70
230/800	230/800 YMB	800	1150	258	860.70
230/800	230/800 YMD	800	1150	258	887.20
240/800	240/800 YMD	800	1150	345	1181.10
231/800	231/800 YMB	800	1280	375	1887.00
241/800	241/800 YMD	800	1280	475	2320.80
232/800	232/800 YMD	800	1420	488	3310.00
238/850	238/850 YMB	850	1030	136	235.70
239/850	239/850 YMB	850	1120	200	552.70
249/850	249/850 YMB	850	1120	272	708.00
230/850	230/850 YMB	850	1220	295	1048.00
240/850	240/850 YMD	850	1220	365	1401.90
231/850	231/850 YMB	850	1360	400	2219.00
232/850	232/850 YMD	850	1500	515	3950.80
239/900	239/900 YMB	900	1180	206	677.40
249/900	249/900 YMB	900	1180	280	811.60
230/900	230/900 YMB	900	1280	280	1130.20
240/900	240/900 YMD	900	1280	375	1557.00
231/900	231/900 YMB	900	1420	412	2446.00
241/900	241/900 YMD	900	1420	515	3054.30
232/900	232/900 YMD	900	1580	515	4302.00
239/950	239/950 YMB	950	1250	224	712.70
230/950	230/950 YMB	950	1360	300	1428.60
230/950	230/950 YMD	950	1360	300	1530.40
240/950	240/950 YMD	950	1360	412	1921.00
231/950	231/950 YMB	950	1500	438	2905.00
241/950	241/950 YMD	950	1500	545	3615.00
238/1000	238/1000 YMB	1000	1220	165	409.20
239/1000	239/1000 YMB	1000	1320	236	862.00
230/1000	230/1000 YMB	1000	1420	308	1541.00
240/1000	240/1000 YMD	1000	1420	412	2087.10
231/1000	231/1000 YMB	1000	1580	462	3403.00
241/1000	241/1000 YMD	1000	1580	580	4276.40
238/1060	238/1060 YMD	1060	1280	165	432.60
239/1060	239/1060 YMB	1060	1400	250	1056.40
230/1060	230/1060 YMB	1060	1500	325	1802.00
240/1060	240/1060 YMD	1060	1500	438	2470.50
231/1060	231/1060 YMB	1060	1660	475	3815.00
239/1120	239/1120 YMB	1120	1460	250	1079.00
230/1120	230/1120 YMD	1120	1580	345	2109.00
240/1120	240/1120 YMB	1120	1580	462	2824.00
231/1120	231/1120 YMB	1120	1750	475	4227.00
238/1180	238/1180 YMB	1180	1420	180	545.80
239/1180	239/1180 YMB	1180	1540	288	1331.50
230/1180	230/1180 YMD	1180	1660	355	2447.90
240/1180	240/1180 YMD	1180	1660	475	3228.30
231/1180	231/1180 YMB	1180	1850	500	4996.00
230/1250	230/1250 YMB	1250	1750	375	2769.00
240/1250	240/1250 YMB	1250	1750	500	3691.00
231/1250	231/1250 YMB	1250	1950	530	5843.00
249/1500	249/1500 YMD	1500	1950	450	3407.00

Remarks

Regarding detailed Timken bearing models except the above-listed series, please contact HSN for technical confirmation. For other bearing types, including deep groove ball bearings, cylindrical roller bearings, tapered roller bearings, thrust bearings, angular contact ball bearings, and non-standard bearings, please contact HSN with the model number, drawing, sample, or working condition.

This article is based on independent analysis of publicly available technical information and industry understanding, and aims to provide knowledge sharing. All brand names and trademarks mentioned in this article belong to their respective owners. HSN Bearing Group is an independent bearing supplier and technical service provider.

Tel: +86 156 6578 7336 Email: service@hsnindustrial.com Website: www.rollingparts.com www.hsnbearings.com

Need Help with Timken Bearing Interchange?

If you need to find hard-to-source bearing stock in China, or want to discuss cost-performance bearing replacement and improvement options for international brand references, contact HSN with your inquiry details.