Common Angular Contact Ball Bearings

Common Angular Contact Ball Bearings：Can bear both radial load and axial load. Can work at higher rotational speeds. The larger the contact angle, the higher the axial load carrying capacity. High precision and high speed bearings usually take 15 degrees contact angle. Under the action of axial force, the contact angle will increase.

Single row angular contact ball bearing

Can only bear a direction of the axial load, in bearing radial load, will cause additional axial force. And can only limit the shaft or shell in a direction of axial displacement. Angular contact ball bearings have a contact angle of 40 degrees, so they can withstand a large axial load. Angular contact ball bearings are non-separate design, the shoulders on both sides of the inner and outer rings are different in height. In order to increase the load capacity of the bearing, the shoulder on one side is machined lower, thus allowing the bearing to fit more balls.

Pairs of duplex ball bearings
If the bearings are mounted in pairs, the outer rings of the pair of bearings are placed opposite to each other, i.e. the wide end faces the wide end and the narrow end faces the narrow end. This avoids causing additional axial forces and keeps the shaft or housing within the axial clearance in both directions.

HSN Bearing can produce its own bearings. At the same time, there are more than 20 cooperative and stable bearing suppliers and raw material suppliers. It has international advanced bearing testing equipment to ensure that the product quality exceeds customer requirements, especially for Common Angular Contact Ball Bearings.