Rod ends bearings

Rod ends bearings

(1) SI…E type is an assembly of GE…E type bearing and rod end. Rod end with internal thread, material is carbon structural steel, no lubricating oil groove. It can withstand radial loads and axial loads less than or equal to 0.2 times the radial load in any...
Interpretation of common faults of bearings

Interpretation of common faults of bearings

1 The bearing temperature is too high When the equipment is running, the part where the bearing is installed is allowed to have a certain working temperature. When stroking the bearing chamber of the equipment with hands, it is generally normal that it does not feel...
The main method to prevent metal rust

The main method to prevent metal rust

(1) Choose corrosion-resistant materials Mainly use non-ferrous metal alloys and stainless steel. (2) Prefabricated metal (alloy) or non-metal covering layer on metal surface 1. Conversion coating: blackening (bluish), phosphating, anodic oxidation; 2. Surface...
How to correctly understand the limit speed of the bearing

How to correctly understand the limit speed of the bearing

The limiting speed of the bearing is the highest speed that the bearing can reach when the bearing is running. It mainly depends on the relationship between the heat generated by friction and the heat discharged when the bearing is running, and the bearing material,...
What are the solid lubricants that can be used for bearings

What are the solid lubricants that can be used for bearings

The main function of the bearing is to reduce friction and reduce loss, so during use, the less contact between the bearing and surrounding parts, the better. Then, if lubricants are used, the effect of reducing losses will be better. In fact, lubricants include...